Share some Network Appliance NCIE-SAN NS0-507 exam questions and answers below.
You have an iSCSI host that is unable to connect to an SVM that is named ¡°svm1¡± over a LIF that is named ¡°lif1¡±. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded.
Which command would you use to solve the problem?
A. Broadcast-domain add-ports ¨Cbroadcast-domain iscsi ¨Cports cl01-01: e0e
B. iSCSI interface enable ¨Cvserver svm1¨Clif lif1
C. Network interface modify ¨Cvserver svm1 ¨Clif lif1 ¨Cfailover-group default
D. Vserver iscsi create ¨Ctarget-alias svm1 ¨Cstatus-admin up ¨Cvserver svm1
Answer: B
You are planning a migration from a 7-mode system running Data ONTAP 7.3 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only FC LUNs for a Windows Server 2012R2 server farm. The 7-Mode system cannot upgrade its volumes to 64-bit.In this scenario, what would you use for the migration?
A. 7-Mode Transition Tool (7MTT)
B. Foreign LUN Import (FLI)
C. OnCommand System Manager
D. Unified Host Utility Kit
Answer: B
You are asked to create a volume and lun, both of which need to be thin provisioned.In this scenario, which two statements are correct? (Choose two.)
A. Use the lun create command with the space-reserve parameter set to disabled
B. Use the lun create command with the space-reserve parameter set to enabled
C. Use the volume create command with the space-guarantee parameter set to none
D. Use the volume create command with the space-guarantee parameter set to volume
Answer: A,C
For which two vendor products would the Unified Host Utilities Kit set HBA and CAN parameters? (Choose two.)
A. Brocade
B. Cisco
C. Emulex
D. Qlogic
Answer: C,D
You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+.
In this scenario, what is the minimum port speed required on the DR Site¡¯s FC switches?
A. 2 Gb
B. 16 Gb
C. 8 Gb
D. 4 Gb
Answer: B
You need to take a cluster node down for extended maintenance, but you want to the FC LIF to avoid re-zoning the switch fabric.
In this scenario, which three steps are required to move the FC LIF so it is available on another node? (Choose three.)
A. Use the network interface migrate command to migrate the new home node and the new home port
B. Perform a takeover and giveback operation for the new destination node
C. Use the network interface modify command to modify the new home node and the new home port
D. Bring the LIF online
E. Take the LIF offline
Answer: C,D,E
Where would you find the environment values of controllers and disk shelves (e.g. BTU and watts)?
A. Interoperability matrix tool (IMT)
B. Installation and setup instructions poster
C. Config advisor
D. Hardware universe
Answer: D
You have an iSCSI host that is unable to connect to an SVM that is named “svm1” over a LIF that is named “lif1”. The home node and port of lif1 is cl01-01 port e0e. The event log show command displays the error iSCSI: network interface disabled for use; incoming connection discarded.Which command would you use to solve the problem?
A. Broadcast-domain add-ports –broadcast-domain iscsi –ports cl01-01: e0e
B. iSCSI interface enable –vserver svm1–lif lif1
C. Network interface modify –vserver svm1 –lif lif1 –failover-group default
D. Vserver iscsi create –target-alias svm1 –status-admin up –vserver svm1
Answer: B
When a new LUN is allocated, which volume and LUN configuration will use the smallest amount of storage?
A. Volume guarantee none, fractional reserve 0, space reservation disabled
B. Volume guarantee none, fractional reserve 0, space reservation enabled
C. Volume guarantee volume, fractional reserve 100, space reservation enabled
D. Volume guarantee volume, fractional reserve 100, space reservation enabled
Answer: A
For which two vendor products would the Unified Host Utilities Kit set HBA and CAN parameters? (Choose two.)
A. Brocade
B. Cisco
C. Emulex
D. Qlogic
Answer: C,D
You have expanded your ONTAP cluster from two nodes to four nodes and want to allow Linux multipathing software to see the paths to all nodes in the cluster.In this scenario, which statement describes how to accomplish this task?
A. Add the WWPN to the host igroup then rescan from the host.
B. Rescan from the host OS and modify the reporting nodes to add the two new nodes.
C. Modify the reporting nodes to add the two new nodes the rescan from the host OS.
D. Rescan from the host OS then add the WWPN to the host igroup.
Answer: C
You are planning a migration from a 7-mode system running Data ONTAP 7.3 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only FC LUNs for a Windows Server 2012R2 server farm. The 7-Mode system cannot upgrade its volumes to 64-bit.
In this scenario, what would you use for the migration?
A. 7-Mode Transition Tool (7MTT)
B. Foreign LUN Import (FLI)
C. OnCommand System Manager
D. Unified Host Utility Kit
Answer: B
According to NetApp best practices, which method should be used for zoning?
A. Single initiator – multiple targets
B. Multiple initiator – single target
C. Single initiator – single target
D. Multiple initiator – multiple targets
Answer: C
Where do you identify the disk shelves and disks that are supported for a specific controller model?
A. Hardware Universe (HWU)
B. Interoperability Matrix Tool (IMT)
C. Disk and Aggregates Power guide
D. Installation and Setup Instructions poster
Answer: A
You have expanded your ONTAP cluster from two nodes to four nodes and want to allow Linux multipathing software to see the paths to all nodes in the cluster.
In this scenario, which statement describes how to accomplish this task?
A. Add the WWPN to the host igroup then rescan from the host.
B. Rescan from the host OS and modify the reporting nodes to add the two new nodes.
C. Modify the reporting nodes to add the two new nodes the rescan from the host OS.
D. Rescan from the host OS then add the WWPN to the host igroup.
Answer: C
The Linux Host Utilities 7.1 configures settings for which three protocols? (Choose three.)
A. NFS
B. iSCSI
C. SMB
D. FCoE
Answer: A,B,D
Referring to the diagram shown in the exhibit, what will happen when the SAS adapter in slot 2 on Node A fails?
A. Node A will continue to access all drives through the onboard SAS port 0a.
B. Node A will lose all access to all drives.
C. Node A will continue to access all drives through the Infiniband connection with Node B.
D. Node A will shut down until SAS adapter in slot 2 is replaced.
Answer: A
You have a switch called ¡°NK5-A¡±. The switch is configured with an NP_Port.
Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs?
A. NPIV
B. NPV
C. FCIP
D. F_port channel trunking
Answer: D
You are asked to create a volume and lun, both of which need to be thin provisioned.
In this scenario, which two statements are correct? (Choose two.)
A. Use the lun create command with the space-reserve parameter set to disabled
B. Use the lun create command with the space-reserve parameter set to enabled
C. Use the volume create command with the space-guarantee parameter set to none
D. Use the volume create command with the space-guarantee parameter set to volume
Answer: A,C
Where do you identify the disk shelves and disks that are supported for a specific controller model?
A. Hardware Universe (HWU)
B. Interoperability Matrix Tool (IMT)
C. Disk and Aggregates Power guide
D. Installation and Setup Instructions poster
Answer: A
Passcert gives you the best possible NCIE-SAN ONTAP 9 NS0-507 Free questions download for Network Appliance Certifications. This test is prepared with high attention to detail and expert analysis. The NCIE-SAN ONTAP 9 NS0-507 Free questions download available at Passcert are carefully updated whenever the need arises. Updated Product is provided free of cost within one year after you purchased.
没有评论:
发表评论